A Comprehensive Guide to Maintenance and Cleaning of Prefabricated Running Tracks: Key Measures to Extend Lifespan

Prefabricated running tracks, as commonly used venues for professional competitions and daily

exercise, require scientific maintenance and cleaning to ensure their durability and performance.

The following provides a comprehensive maintenance plan from four dimensions: basic care, daily

cleaning, damage repair, and special environment response, helping managers extend the lifespan

of the track and ensure safe use.

I. Basic Care: Critical Preparations After Construction and Before Use

2. Restrictions on Use Management
   • It is strictly prohibited to drive vehicles or stack heavy objects on the track to prevent deformation of the base layer or cracking of the surface layer.
   • Prohibit carrying cigarette butts or other flammable objects and corrosive chemicals into the venue to avoid high temperatures or chemical corrosion causing material aging.

II. Daily Cleaning: Regular Maintenance and Stain Removal

(I) Regular Cleaning Methods

(II) Special Stain Treatment

• Oil Stain Pollution：Use 10% ammonia water, neutral detergent, or laundry powder to scrub, then rinse with clean water.
• Corner and Edge Cleaning：Focus on checking areas prone to dust accumulation, such as curbs and drainage ditches, and regularly clean debris from gaps.

III. Damage Repair: Graded Treatment Plan

(I) Minor Damage (Scratches, Small Area Wear)

1. Scratch Repair：After cleaning the scratched area, apply a special repair glue, cover with heavy objects to compress until dry.
2. Small Area Wear：
   • Grind the worn area to create a rough surface to enhance adhesion;
   • Mix prefabricated plastic particles with special glue according to the proportion, fill in and level with a scraper, and let it cure naturally.

(II) Serious Damage (Large Area Delamination, Potholes)

1. Base Layer Treatment：Thoroughly remove loose materials to expose a solid base layer, patch up with cement, and let it dry.
2. Resurface：Lay prefabricated materials according to standard thickness, roll to ensure seamless connection with the original track, and grind edges after curing.
3. Damaged Curbstones：When curbstones crack or fall off, immediately contact professional manufacturers for repairs to prevent further damage.

IV. Special Environment Response: Extreme Weather and High-Frequency Use Management

(I) Climate Adaptability Measures

• High Temperature Weather：Avoid using during noon, regularly spray water to cool down, and strengthen fire patrols.
• Rainy Season：Check the drainage system, promptly clean up accumulated water and mud, and prevent the base layer from soaking and deforming.

(II) Enhanced Maintenance for High-Frequency Use Scenarios

• Increase the frequency of cleaning every day, focusing on checking wear-prone areas such as starting areas and bends;
• Record the usage status of the track every month, including cleaning time, repair records, and environmental impact, to provide data support for optimizing maintenance plans.

V. Professional Advice: Scientific Maintenance to Extend Track Lifespan

Although prefabricated running tracks are easy to maintain, complex issues (such as curbstone

replacement and drainage system renovation) should be handled by professional teams. It is

recommended to cooperate with the construction manufacturer  regularly to develop a customized

maintenance plan, dynamically adjusting the plan based on usage frequency and climate

characteristics to maximize the performance of the track at the lowest cost.

Through the above measures, the lifespan of prefabricated running tracks can be extended to 8-10

years while maintaining good elasticity and safety, providing lasting protection for sports enthusiasts.